28100
1.INSTALL STARTER ASSEMBLY
Install the starter assembly with the 2 bolts.
Connect the starter wire with the nut.
Close the terminal cap.
Connect the starter connector.
17343D
2.INSTALL NO. 3 AIR HOSE
17361J
3.INSTALL NO. 1 AIR TUBE
Install the No. 1 air tube with the 2 bolts.
Tighten the 2 clamps.
Attach the 2 wire harness clamps.
Install the bolt and attach the wire harness clamp.
17119A
4.INSTALL AIR CLEANER BRACKET
5.CONNECT FUEL FILTER ASSEMBLY
Connect the fuel filter assembly with the bolt.
17769
6.INSTALL AIR CLEANER SUPPORT
7.INSTALL AIR CLEANER CASE
17801
8.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
17705
9.INSTALL AIR CLEANER CAP SUB-ASSEMBLY
74414B
10.INSTALL BATTERY BRACKET REINFORCEMENT
74417
11.INSTALL FRONT BATTERY BRACKET
74431
12.INSTALL BATTERY TRAY
28800
13.INSTALL BATTERY
28899
14.INSTALL BATTERY INSULATOR
74404A
15.INSTALL BATTERY CLAMP SUB-ASSEMBLY
16.CONNECT CABLE TO POSITIVE BATTERY TERMINAL
51441
17.INSTALL NO. 1 ENGINE UNDER COVER
12611
18.INSTALL NO. 1 ENGINE COVER
19.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION