Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050028 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 87139C 1.INSTALL CLEAN AIR FILTER

a.
E265986

Install the air refiner element as shown in the illustration.

NOTICE:

Install the air refiner element with its UP mark oriented in the correct direction.



Hide 88548B 2.INSTALL AIR FILTER CASE

a.

Engage the guide and claw to install the air filter case.


Hide 87130D 3.INSTALL BLOWER ASSEMBLY

a.

Install the blower assembly to the air conditioning radiator assembly with the 3 screws.


b.

Connect the connector.


c.

w/ PTC heater:

Connect the connector bracket with the screw and attach the wire harness.


Hide 4.INSTALL AIR CONDITIONER UNIT ASSEMBLY