Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84140
1.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
Attach the 2 claws to install the headlight dimmer switch assembly.
Connect the connectors.
84650
2.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
84306
3.INSTALL SPIRAL CABLE SUB-ASSEMBLY
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
5.CHECK SRS WARNING LIGHT