Home › Drivetrain › CLUTCH › CLUTCH PEDAL(for RHD)
RM3090E _52 Drivetrain _008754 CLUTCH _0050264 CLUTCH PEDAL(for RHD) A

CLUTCH  CLUTCH PEDAL(for RHD)  INSTALLATION  


PROCEDURE

Hide 31321 1.INSTALL CLUTCH PEDAL PAD

a.

Install the clutch pedal pad to the clutch pedal sub-assembly.


Hide 31301B 2.INSTALL NO. 1 CLUTCH PEDAL CUSHION

C128849

a.

Install the No. 1 clutch pedal cushion to the clutch pedal sub-assembly.


Hide 31324A 3.INSTALL CLUTCH PEDAL SHAFT COLLAR

C279731C01
2.531,1.344 2.688,1.542 0.156,0.198 10 false .
V100135

MP grease


a.

Apply MP grease to both sides of the clutch pedal shaft collar and 2 new bushes.


b.

Install the clutch pedal shaft collar.


c.

Install the 2 bushes.


Hide 31353 4.INSTALL CLUTCH PEDAL SPRING HOLDER

C279729C01
1.823,0.073 1.979,0.271 0.156,0.198 10 false .
V100135

MP grease


a.

Apply MP grease to the contact surface of the clutch pedal spring holder.


b.

Install the clutch pedal spring holder.


Hide 31301 5.INSTALL CLUTCH PEDAL SUB-ASSEMBLY

C128473

a.

Install the clutch pedal to the clutch pedal support with the bolt and nut.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)

HINT:

Install the bolt from the left side of the vehicle.



Hide 31394A 6.INSTALL PEDAL WITH HOOK SPRING

C279730C01
1.802,1.333 1.958,1.531 0.156,0.198 10 false .
V100135

MP grease


a.

Apply MP grease to the contact surface of the clutch pedal sub-assembly.


b.

Install the pedal with hook spring.


Hide 88280A 7.INSTALL CLUTCH SWITCH ASSEMBLY

Hide 84520 8.INSTALL CLUTCH START SWITCH ASSEMBLY

Hide 55107A 9.INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY

a.

Apply MP grease to the contact surface of the clutch master cylinder push rod clevis and the clutch pedal support sub-assembly.


b.
C279743C01
1.927,1.417 1.958,1.323 false
V100135

MP grease


Install the clutch master cylinder push rod clevis to the cutout of the clutch pedal sub-assembly from the left side of the vehicle and push it downward.


c.

Install the clutch pedal support sub-assembly with the 2 bolts and 2 nuts.

Torque:
for bolt : 24 N*m (245 kgf*cm, 18 ft.*lbf)
for nut : 13 N*m (133 kgf*cm, 10 ft.*lbf)

NOTICE:

Check that the push rod cannot be turned 30° or more in order to confirm that the clevis is securely engaged in the pedal.



d.

Connect the 2 connectors and 2 clamps.


Hide 87201B 10.INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

Hide 73900 11.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

Hide 31301 12.INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY