31470
1.INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY
Install the clutch release cylinder assembly and No. 1 clutch tube bracket with the 2 bolts.
31482
2.CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE
| *A | for LHD |
| *B | for RHD |
Temporarily install the clutch release cylinder to flexible hose tube labeled A.
Connect the clutch release cylinder to flexible hose tube with the 3 bolts.
Using a union nut wrench, tighten the clutch release cylinder to flexible hose tube.
Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench. Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
3.BLEED CLUTCH PIPE LINE
for 1AD-FTV:
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM(for 1AD-FTV)>BLEEDING
for 2AD-FTV:
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM(for 2AD-FTV)>BLEEDING
4.CHECK FOR BRAKE FLUID LEAKAGE
74414B
5.INSTALL BATTERY BRACKET REINFORCEMENT
for 1AD-FTV:
Click hereEngine / Hybrid System>1AD-FTV STARTING>STARTER>INSTALLATION
for 2AD-FTV:
Click hereEngine / Hybrid System>2AD-FTV STARTING>STARTER>INSTALLATION