43420
1.REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
31105H
2.REMOVE TRANSMISSION CASE OIL SEAL
Using SST, tap out the transmission case oil seal.
31105H
3.INSTALL TRANSMISSION CASE OIL SEAL
| *a | -0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.) |
Coat the lip of a new transmission case oil seal with MP grease.
Using SST and a hammer, tap in the transmission case oil seal.
-0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the lip of the transmission case oil seal.
43420
4.INSTALL FRONT DRIVE SHAFT ASSEMBLY LH