1.REMOVE ENGINE ASSEMBLY WITH MANUAL TRANSAXLE
28100
2.REMOVE STARTER ASSEMBLY
12311A
3.REMOVE FRONT ENGINE MOUNTING BRACKET
Remove the 3 bolts and front engine mounting bracket.
12321A
4.REMOVE REAR ENGINE MOUNTING BRACKET
Remove the 4 bolts and rear engine mounting bracket.
12325A
5.REMOVE ENGINE MOUNTING BRACKET LH
Perform this procedure only when replacement of the engine mounting bracket LH is necessary.
Remove the 4 bolts and engine mounting bracket LH from the manual transaxle assembly.
12156
6.REMOVE OIL PAN INSULATOR
33119C
7.REMOVE STIFFENER PLATE LH
33119C
8.REMOVE STIFFENER PLATE RH
30300
9.REMOVE MANUAL TRANSAXLE ASSEMBLY
Remove the 5 bolts.
Separate and remove the manual transaxle assembly from the engine.
36100
10.REMOVE TRANSFER ASSEMBLY
36100A
11.REMOVE TRANSFER AND TRANSAXLE SETTING STUD BOLT
Transfer Side:
Click hereDrivetrain>GF1A TRANSFER / 4WD / AWD>TRANSFER ASSEMBLY>DISASSEMBLY
Remove the 2 transfer and transaxle setting stud bolts.
It is not necessary to remove the transfer and transaxle setting stud bolts unless they are being replaced.