Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SENSOR
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0050324 BLIND SPOT MONITOR SENSOR A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SENSOR  INSTALLATION  


PROCEDURE

Hide 88172 1.INSTALL BLIND SPOT MONITOR SENSOR LH

NOTICE:
·

Avoid any impact to the blind spot monitor sensor LH.

·

Do not drop the blind spot monitor sensor LH. If it is dropped, replace it with a new one.



a.

Connect the connector.


b.

Install the blind spot monitor sensor LH with the 3 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 88162 2.INSTALL BLIND SPOT MONITOR SENSOR RH

NOTICE:
·

Avoid any impact to the blind spot monitor sensor RH.

·

Do not drop the blind spot monitor sensor RH. If it is dropped, replace it with a new one.



a.

Connect the connector.


b.

Install the blind spot monitor sensor RH with the 3 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 52159 3.INSTALL REAR BUMPER COVER

Hide 76626E 4.INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

Hide 76625G 5.INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)