Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
73432
1.INSTALL REAR SEAT BELT RETRACTOR COVER LH
Attach the claw to install the rear seat belt retractor cover LH.
73370C
2.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
| *1 | Bolt (A) |
| *2 | Bolt (B) |
Align the 2 claws with the seat belt positioning holes, and install the retractor of the rear No. 1 seat outer belt assembly LH with the 2 bolts as shown in the illustration.
62480A
3.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH
64740E
4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
73370C
5.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Connect the shoulder anchor of the rear No. 1 seat outer belt assembly LH with the bolt.
Check that the rear No. 1 seat outer belt assembly LH is not twisted.
Connect the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.
Check that the rear No. 1 seat outer belt assembly LH is not twisted.
73178A
6.INSTALL SEAT BELT ANCHOR COVER CAP
Attach the guide and 2 claws to install the seat belt anchor cover cap.
62332C
7.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
67918E
8.INSTALL REAR DOOR SCUFF PLATE LH
9.INSTALL REAR SEAT ASSEMBLY LH
58577E
10.INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE WITH REAR NO. 1 FLOOR BOARD
w/o Spare Tire, for Compact Spare Tire:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
w/ Full Size Spare Tire:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
64716P
11.INSTALL REAR DECK TRIM COVER (w/ Full Size Spare Tire)
58386
12.INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Tire)
64997
13.INSTALL DECK FLOOR BOX LH
58410B
14.INSTALL DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)
58410B
15.INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Tire)
64910N
16.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
64309A
17.INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)