Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR MAIN SWITCH(for RHD) › 2012.12–2015.10
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0050342 BLIND SPOT MONITOR MAIN SWITCH(for RHD) A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR MAIN SWITCH(for RHD)  INSTALLATION  


PROCEDURE

Hide 83950M 1.INSTALL TELLTALE LIGHT ASSEMBLY (BLIND SPOT MONITOR MAIN SWITCH)

a.

Connect the connector.


b.

Attach the claw and 2 clips to install the telltale light assembly (blind spot monitor main switch).


Hide 55412C 2.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION