Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL MOUNT CUSHION
RM3090E _52 Drivetrain _008762 AXLE AND DIFFERENTIAL _0050532 DIFFERENTIAL MOUNT CUSHION A

AXLE AND DIFFERENTIAL  DIFFERENTIAL MOUNT CUSHION  REMOVAL  


PROCEDURE

Hide 41196 1.REMOVE REAR DIFFERENTIAL DYNAMIC DAMPER LH

a.
C127577

Remove the 2 bolts and rear differential dynamic damper LH (front side) from the rear No. 1 differential support.


Hide 41196 2.REMOVE REAR DIFFERENTIAL DYNAMIC DAMPER RH

a.
C279604

Remove the 2 bolts and rear differential dynamic damper RH (front side) from the rear No. 2 differential support.


Hide 41101 3.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

Hide 51206A 4.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

Hide 41651 5.REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

a.

Using SST, remove the rear No. 1 differential mount cushion.

C279605C03
1.167,1.594 0.927,1.594 0.927,1.594 0.927,1.469 false 6.542,1.99 5.885,1.99 5.885,1.99 5.885,1.802 false 6.375,1.979 6.375,1.656 false 6.146,0.833 6.469,0.833 false 1.219,1.521 1.698,1.75 0.479,0.229 10 SST 6.573,1.906 7.031,2.104 0.458,0.198 10 SST 6.521,0.75 6.854,1.052 0.333,0.302 10 *1
*1 Rear Suspension Member Sub-assembly - -
V100136

Front of Vehicle - -


SST
09316-12010  09570-24011  

NOTICE:
·

Do not bring SST into contact with the rear suspension member sub-assembly.

·

Before using SST, apply grease to SST bolt.

·

Set SST in the correct direction.

·

Do not tilt the bolt of SST.

·

Do not reuse the rear No. 1 differential mount cushion.