1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
33111Q
2.REMOVE TRANSMISSION CASE OIL SEAL
Using SST, remove the transmission case oil seal.
33111Q
3.INSTALL TRANSMISSION CASE OIL SEAL
Coat the lip of a new transmission case oil seal with MP grease.
| *a | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) |
Using SST and a hammer, tap in a new transmission case oil seal to the manual transmission case.
-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Do not damage the transmission oil seal lip.
4.INSTALL FRONT DRIVE SHAFT ASSEMBLY