Home › Drivetrain › U760F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM3090E _52 Drivetrain _008753 U760F AUTOMATIC TRANSMISSION / TRANSAXLE _0051086 TRANSMISSION CONTROL CABLE N

U760F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  ADJUSTMENT  


PROCEDURE

Hide 1.ADJUST SHIFT LEVER POSITION

a.

Apply the parking brake and move the shift lever to N.


b.

c.
C194520C16
2.271,2.583 2.615,2.583 false 1.948,1.75 2.083,1.531 2.083,1.531 2.188,1.531 false 1.542,0.958 1.729,1.135 0.188,0.177 10 *a 1.771,1.365 1.958,1.542 0.188,0.177 10 *a 2.448,0.885 2.635,1.063 0.188,0.177 10 *b 2.229,1.448 2.417,1.625 0.188,0.177 10 *1 2.219,2.302 2.406,2.479 0.188,0.177 10 *b 2.635,2.49 2.823,2.667 0.188,0.177 10 *2
*1 Slider
*2 Lock Piece
*a Slide
*b Pull


Slide the slider of the transmission control cable assembly in the direction indicated by the arrow and pull the lock piece outward.


d.

Install the end of the transmission control cable assembly to the shift lever assembly.

NOTICE:
·

Check that the lock piece is pulled up.


·

Install the cable end all the way to the base of the pin.




e.
C278980C01
0.781,0.531 0.677,0.146 0.677,0.146 0.563,0.146 true 0.396,0.073 0.708,0.271 0.313,0.198 10 *1 0.156,1.365 0.469,1.563 0.313,0.198 10 *a
*1 Adjuster Case
*a Push in


Push the lock piece into the adjuster case.

NOTICE:
·

Check that the park/neutral position switch assembly and the shift lever are in neutral.


·

Securely push in the lock piece until the slider lock is engaged.




f.

After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the position again.