Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER › 2013.11–2015.10
RM3090E _56 Audio / Visual / Telematics _008775 AUDIO / VIDEO _0049775 RADIO RECEIVER A

AUDIO / VIDEO  RADIO RECEIVER  INSTALLATION  


PROCEDURE

Hide 86211 1.INSTALL NO. 1 RADIO BRACKET

a.

Install the No. 1 radio bracket with the 3 screws.


Hide 86212 2.INSTALL NO. 2 RADIO BRACKET

a.

Install the No. 2 radio bracket with the 3 screws.


Hide 86140A 3.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

a.

Connect each connector.


b.

Attach the 4 clips to install the radio and display receiver assembly with bracket.


c.

Install the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 86120 4.INSTALL RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

a.

Connect each connector.


b.

Attach the 4 clips to install the radio receiver assembly with bracket.


c.

Install the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 83950M 5.INSTALL TELLTALE LIGHT ASSEMBLY

Hide 55670 6.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55680A 7.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55412C 8.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION