Home › Drivetrain › EA64F MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSAXLE ASSEMBLY › 2013.11–2015.10
RM3090E _52 Drivetrain _008756 EA64F MANUAL TRANSMISSION / TRANSAXLE _0050297 MANUAL TRANSAXLE ASSEMBLY A

EA64F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.REMOVE ENGINE ASSEMBLY WITH MANUAL TRANSAXLE

Hide 28100 2.REMOVE STARTER ASSEMBLY

Hide 12311A 3.REMOVE FRONT ENGINE MOUNTING BRACKET

a.
A295907

Remove the 3 bolts and front engine mounting bracket.


Hide 12321A 4.REMOVE REAR ENGINE MOUNTING BRACKET

a.
A224434

Remove the 4 bolts and rear engine mounting bracket.


Hide 12325A 5.REMOVE ENGINE MOUNTING BRACKET LH

HINT:

Perform this procedure only when replacement of the engine mounting bracket LH is necessary.


a.
A272273

Remove the 4 bolts and engine mounting bracket LH from the manual transaxle assembly.


Hide 30300 9.REMOVE MANUAL TRANSAXLE ASSEMBLY

C112442

a.

Remove the 5 bolts.


b.

Separate and remove the manual transaxle assembly from the engine.


Hide 36100 10.REMOVE TRANSFER ASSEMBLY

Hide 36100A 11.REMOVE TRANSFER AND TRANSAXLE SETTING STUD BOLT


a.
C299941

Remove the 2 transfer and transaxle setting stud bolts.

HINT:

It is not necessary to remove the transfer and transaxle setting stud bolts unless they are being replaced.