Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) › from 2013.11
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0103549 PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) J

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU)  Image from Camera for Parking Assist Monitor is Abnormal  


DESCRIPTION

The display signal of the television camera assembly is transmitted to the navigation receiver assembly*1 or radio and display receiver assembly*2.

*1: for Navigation Receiver Type

*2: for Radio and Display Type


WIRING DIAGRAM

E288886E01
5.208,2.74 5.823,2.938 0.615,0.198 10 false U22 5.219,2.927 7.042,3.26 1.823,0.333 10 false Television Camera Assembly 0.26,2.76 0.875,2.958 0.615,0.198 10 false G158 0.271,2.927 2.177,3.167 1.906,0.24 10 false Navigation Receiver Assembly 1.365,1.458 1.635,1.656 0.271,0.198 10 false V+ 1.385,1.875 1.594,2.073 0.208,0.198 10 false V- 1.656,1.354 1.875,1.563 0.219,0.208 10 false 12 5.531,1.885 6.146,2.083 0.615,0.198 10 false CV- 1.667,1.771 1.896,1.99 0.229,0.219 10 false 24 5.531,1.469 6.146,1.667 0.615,0.198 10 false CV+ 5.354,1.344 5.49,1.542 0.135,0.198 10 false 3 5.354,1.781 5.49,1.979 0.135,0.198 10 false 2 0.083,0.052 2.521,0.333 2.438,0.281 12 false for Navigation Receiver Type: 1.271,1.031 1.573,1.25 0.302,0.219 10 false CA+ 1.135,2.302 1.615,2.51 0.479,0.208 10 false CGND 5.354,0.948 5.49,1.146 0.135,0.198 10 false 6 5.531,1.042 6.146,1.24 0.615,0.198 10 false CB+ 5.531,2.302 6.01,2.51 0.479,0.208 10 false CGND 1.656,2.208 1.885,2.427 0.229,0.219 10 false 23 1.656,0.938 1.875,1.146 0.219,0.208 10 false 11 5.354,2.208 5.49,2.406 0.135,0.198 10 false 5 4.5,2.448 4.635,2.646 0.135,0.198 10 false * 3.552,2.458 3.688,2.656 0.135,0.198 10 false * 2.583,2.469 2.719,2.667 0.135,0.198 10 false * 0.094,3.417 1.333,3.646 1.24,0.229 10 false *: Shielded

E288886E02
0.083,2.75 0.698,2.948 0.615,0.198 10 false G159 0.083,2.917 2.573,3.219 2.49,0.302 10 false Radio and Display Receiver Assembly 1.354,1.875 1.583,2.115 0.229,0.24 10 false V- 1.354,1.458 1.583,1.698 0.229,0.24 10 false V+ 1.646,1.344 1.875,1.583 0.229,0.24 10 false 12 1.656,1.76 1.885,2 0.229,0.24 10 false 24 5.354,1.792 5.51,1.99 0.156,0.198 10 false 2 5.354,1.365 5.51,1.563 0.156,0.198 10 false 3 5.563,1.469 5.927,1.677 0.365,0.208 10 false CV+ 5.563,1.896 5.927,2.104 0.365,0.208 10 false CV- 5.208,2.74 5.573,2.948 0.365,0.208 10 false U22 5.208,2.917 7.073,3.156 1.865,0.24 10 false Television Camera Assembly 0.073,0.063 2.563,0.365 2.49,0.302 12 false for Radio and Display Type: 1.656,2.208 1.885,2.448 0.229,0.24 10 false 23 1.146,2.302 1.594,2.521 0.448,0.219 10 false CGND 1.26,1.031 1.708,1.25 0.448,0.219 10 false CA+ 5.563,1.042 6.01,1.26 0.448,0.219 10 false CB+ 5.354,0.938 5.51,1.135 0.156,0.198 10 false 6 5.563,2.323 6.01,2.542 0.448,0.219 10 false CGND 5.354,2.198 5.51,2.396 0.156,0.198 10 false 5 4.51,2.438 4.688,2.635 0.177,0.198 10 false * 3.594,2.458 3.771,2.656 0.177,0.198 10 false * 2.583,2.458 2.76,2.656 0.177,0.198 10 false * 0.125,3.417 1.708,3.625 1.583,0.208 10 false *: Shielded 1.635,0.917 1.865,1.156 0.229,0.24 10 false 11

PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check the vehicle type.


Result:
Proceed to
for Navigation Receiver Type
for Radio and Display Type



for Navigation Receiver Type

2.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - TELEVISION CAMERA ASSEMBLY)

for Radio and Display Type

5.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - TELEVISION CAMERA ASSEMBLY)
2.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - TELEVISION CAMERA ASSEMBLY)
a.

Disconnect the G158 navigation receiver assembly connector.


b.

Disconnect the U6 television camera assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G158-11 (CA+) - U6-6 (CB+) Always Below 1 Ω
G158-12 (V+) - U6-3 (CV+) Always Below 1 Ω
G158-24 (V-) - U6-2 (CV-) Always Below 1 Ω
G158-23 (CGND) - U6-5 (CGND) Always Below 1 Ω
G158-11 (CA+) - Body ground Always 10 kΩ or higher
G158-12 (V+) - Body ground Always 10 kΩ or higher
G158-24 (V-) - Body ground Always 10 kΩ or higher
G158-23 (CGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK NAVIGATION RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK NAVIGATION RECEIVER ASSEMBLY
a.
E280624C11
1.458,0.323 2.01,0.583 0.552,0.26 1.094,1.031 0.813,0.729 0.813,0.729 0.469,0.729 true 1.094,1.271 1.021,1.927 1.021,1.927 0.75,1.927 true 0.938,1.271 0.875,1.635 0.875,1.635 0.698,1.635 true 1.552,0.354 2.167,0.552 0.615,0.198 10 false G158 0.104,0.104 0.417,0.302 0.313,0.198 10 false *a 0.469,1.552 0.781,1.75 0.313,0.198 10 false V- 0.135,0.635 0.521,0.833 0.385,0.198 10 false CA+ 0.281,1.844 0.771,2.052 0.49,0.208 10 false CGND
*a Component with harness connected
(Navigation Receiver Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G158-23 (CGND) - Body ground Always Below 1 Ω
G158-24 (V-) - Body ground Always Below 1 Ω



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
G158-11 (CA+) - Body ground Ignition switch ON 5.5 to 7.05 V



Result:
Proceed to
OK
NG



OK

4.CHECK TELEVISION CAMERA ASSEMBLY

NG

4.CHECK TELEVISION CAMERA ASSEMBLY
a.

Check the waveform of the television camera assembly using an oscilloscope.

E280623C07
1.25,0.531 1.75,0.802 0.5,0.271 3.146,2.292 3.344,2.292 3.344,2.292 3.5,1.792 false 3.885,2.281 3.729,2.281 3.729,2.281 3.594,1.729 false 6.052,2.188 5.896,2.188 5.896,2.188 5.76,1.635 false 5.302,2.177 5.5,2.177 5.5,2.177 5.656,1.677 false 0.646,2.073 0.813,2.073 0.813,2.073 0.917,1.458 true 0.385,0.969 0.552,0.969 0.552,0.969 0.781,1.24 true 0.073,0.167 0.385,0.365 0.313,0.198 10 false *a 3.042,0.188 3.354,0.385 0.313,0.198 10 false *b 5.177,0.167 5.49,0.365 0.313,0.198 10 false *c 2.917,2.188 3.229,2.385 0.313,0.198 10 false *d 5.115,2.094 5.427,2.292 0.313,0.198 10 false *d 3.979,2.198 4.292,2.396 0.313,0.198 10 false *e 6.104,2.104 6.417,2.302 0.313,0.198 10 false *e 4.969,1.354 5.396,1.552 0.427,0.198 10 false GND 2.823,1.344 3.25,1.542 0.427,0.198 10 false GND 0.094,0.906 0.521,1.104 0.427,0.198 10 false V+ 0.188,2.01 0.74,2.229 0.552,0.219 10 false CGND 1.333,0.583 1.76,0.781 0.427,0.198 10 false G158
*a Component with harness connected
(Navigation Receiver Assembly)
*b Waveform 1
*c Waveform 2 *d Synchronized Signal
*e Video Waveform - -


HINT:

A waterproof connector is used for the television camera assembly. Therefore, inspect the waveform at the navigation receiver assembly with the connector connected.


OK:

Waveform is as shown in the illustration.


Item Content
Terminal No. (Symbol) G158-12 (V+) - G158-23 (CGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Waveform 1: Ignition switch ON, camera lens is not covered, displaying an image
Waveform 2: Ignition switch ON, camera lens is covered, blacking out the screen

HINT:

The video waveform changes according to the image sent by the television camera assembly.



Result:
Proceed to
OK
NG



OK

NG

5.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - TELEVISION CAMERA ASSEMBLY)
a.

Disconnect the G159 radio and display receiver assembly connector.


b.

Disconnect the U22 television camera assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G159-11 (CA+) - U22-6 (CB+) Always Below 1 Ω
G159-12 (V+) - U22-3 (CV+) Always Below 1 Ω
G159-24 (V-) - U22-2 (CV-) Always Below 1 Ω
G159-23 (CGND) - U22-5 (CGND) Always Below 1 Ω
G159-11 (CA+) - Body ground Always 10 kΩ or higher
G159-12 (V+) - Body ground Always 10 kΩ or higher
G159-24 (V-) - Body ground Always 10 kΩ or higher
G159-23 (CGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

6.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.
E280624C09
1.458,0.323 2.01,0.583 0.552,0.26 1.094,1.031 0.813,0.729 0.813,0.729 0.469,0.729 true 1.094,1.271 1.021,1.927 1.021,1.927 0.75,1.927 true 1.552,0.354 2.167,0.552 0.615,0.198 10 false G159 0.104,0.104 0.417,0.302 0.313,0.198 10 false *a 0.135,0.635 0.521,0.833 0.385,0.198 10 false CA+ 0.281,1.844 0.771,2.052 0.49,0.208 10 false CGND
*a Component with harness connected
(Radio and Display Receiver Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G159-23 (CGND) - Body ground Always Below 1 Ω
G159-24 (V-) - Body ground Always Below 1 Ω



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
G159-11 (CA+) - Body ground Ignition switch ON 5.5 to 7.05 V



Result:
Proceed to
OK
NG



OK

7.CHECK TELEVISION CAMERA ASSEMBLY

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

7.CHECK TELEVISION CAMERA ASSEMBLY
a.

Check the waveform of the television camera assembly using an oscilloscope.

E280623C06
1.25,0.531 1.75,0.802 0.5,0.271 3.146,2.292 3.344,2.292 3.344,2.292 3.5,1.792 false 3.885,2.281 3.729,2.281 3.729,2.281 3.594,1.729 false 6.052,2.188 5.896,2.188 5.896,2.188 5.76,1.635 false 5.302,2.177 5.5,2.177 5.5,2.177 5.656,1.677 false 0.646,2.073 0.813,2.073 0.813,2.073 0.917,1.458 true 0.385,0.969 0.552,0.969 0.552,0.969 0.781,1.24 true 0.073,0.167 0.385,0.365 0.313,0.198 10 false *a 3.042,0.188 3.354,0.385 0.313,0.198 10 false *b 5.177,0.167 5.49,0.365 0.313,0.198 10 false *c 2.917,2.188 3.229,2.385 0.313,0.198 10 false *d 5.115,2.094 5.427,2.292 0.313,0.198 10 false *d 3.979,2.198 4.292,2.396 0.313,0.198 10 false *e 6.104,2.104 6.417,2.302 0.313,0.198 10 false *e 4.969,1.354 5.396,1.552 0.427,0.198 10 false GND 2.823,1.344 3.25,1.542 0.427,0.198 10 false GND 0.094,0.906 0.521,1.104 0.427,0.198 10 false V+ 0.188,2.01 0.74,2.229 0.552,0.219 10 false CGND 1.333,0.583 1.76,0.781 0.427,0.198 10 false G159
*a Component with harness connected
(Radio and Display Receiver Assembly)
*b Waveform 1
*c Waveform 2 *d Synchronized Signal
*e Video Waveform - -


HINT:

A waterproof connector is used for the television camera assembly. Therefore, inspect the waveform at the radio and display receiver assembly with the connector connected.


OK:

Waveform is as shown in the illustration.


Item Content
Terminal No. (Symbol) G159-12 (V+) - G159-23 (CGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Waveform 1: Ignition switch ON, camera lens is not covered, displaying an image
Waveform 2: Ignition switch ON, camera lens is covered, blacking out the screen

HINT:

The video waveform changes according to the image sent by the television camera assembly.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG