Home › Drivetrain › CLUTCH › CLUTCH UNIT(for Diesel) › 2013.11–2015.10
RM3090E _52 Drivetrain _008754 CLUTCH _0050268 CLUTCH UNIT(for Diesel) A

CLUTCH  CLUTCH UNIT(for Diesel)  REMOVAL  


PROCEDURE

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
C113576

Remove the clutch release fork sub-assembly with the clutch release bearing from the manual transaxle assembly.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.
C116601

Remove the clutch release bearing assembly from the clutch release fork sub-assembly.


Hide 31236B 4.REMOVE RELEASE FORK SUPPORT

a.
C304173

Remove the release fork support from the manual transaxle assembly.


Hide 31126 5.REMOVE CLUTCH RELEASE FORK BOOT

a.
C113599

Remove the clutch release fork boot from the manual transaxle assembly.


Hide 31210 6.REMOVE CLUTCH COVER ASSEMBLY

a.
C279756C01
1.698,0.396 1.875,0.292 1.875,0.292 2.042,0.281 true 2.083,0.948 2.375,0.948 2.375,0.948 2.375,0.958 true 2.042,1.625 2.042,1.635 2.042,1.635 2.281,1.635 true 1.51,1.885 1.74,1.979 1.74,1.979 1.896,1.979 true 0.323,1.208 0.844,1.208 true 0.813,0.219 1.01,0.219 1.01,0.219 1.073,0.354 true 0.438,1.896 1.323,1.896 true 2.083,0.198 2.24,0.396 0.156,0.198 10 false 1 0.646,0.115 0.802,0.313 0.156,0.198 10 false 3 2.458,0.885 2.615,1.083 0.156,0.198 10 false 6 2.396,1.573 2.552,1.771 0.156,0.198 10 false 4 1.958,1.927 2.115,2.125 0.156,0.198 10 false 2 0.146,1.135 0.302,1.333 0.156,0.198 10 false 5 0.177,1.792 0.375,1.99 0.198,0.198 10 false *a
*a Matchmark


Align the matchmarks on the clutch cover assembly and flywheel.


b.

Loosen each set bolt 180° at a time until the spring tension is released.

NOTICE:

Following the order in the illustration, make sure to uniformly loosen the bolts 180° at a time.



c.

Remove the set bolts, and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc.



Hide 31250 7.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.