Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2013.11–2014.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0048745 NAVIGATION SYSTEM(for HDD) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  B15B8  Harddisk Malfunction  


DESCRIPTION

This DTC is stored when the hard disc which is built into the navigation ECU sub-assembly has an initialization malfunction or read/write errors occur more than a specified number of times.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15B8 Harddisk Malfunction Hard Disc malfunction Navigation ECU sub-assembly

PROCEDURE

1.CHECK HARD DISC
a.
E225797C02
2.499,0.803 2.499,1.731 false 2.407,1.725 2.587,1.893 0.179,0.168 10 *a
*a Result


Enter the "HDD Check" screen. Refer to Check Hard Disc in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>OPERATION CHECK


b.

Select "HDD Check" and check the result.

HINT:

After "HDD Check" is selected, it may take a while until the result is displayed.



Result:
Proceed to
"OK" is displayed
"OK" is not displayed



"OK" is displayed

2.CHECK DTC

"OK" is not displayed

2.CHECK DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Recheck for DTCs and check if the same DTC is output again.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for HDD)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Trouble Codes
50001 212
HINT:

The hard disc may be malfunctioning even if DTC B15B8 is not output.



Result:
Proceed to
No DTCs are output
DTCs are output



No DTCs are output

DTCs are output