Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Radio and Display Type) › 2014.10–2015.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0148247 NAVIGATION SYSTEM(for Radio and Display Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  B1550  DAB Tuner Malfunction  B158D  Video Signal Stoppage  B15A0  LAN Master Malfunction  B15B0  Display Screen Malfunction  B15B3  Radio Tuner Malfunction  B15B4  CD Changer Malfunction  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the radio and display receiver assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area
B1550 DAB Tuner Malfunction Digital radio tuner has a malfunction Radio and display receiver assembly
B158D Video Signal Stoppage The internal video signal of the radio and display receiver assembly is interrupted Radio and display receiver assembly
B15A0 LAN Master Malfunction When either of the conditions below is met:
·

Bus malfunction

·

EEPROM error


Radio and display receiver assembly
B15B0 Display Screen Malfunction Picture circuit (TFT unit) malfunction Radio and display receiver assembly
B15B3 Radio Tuner Malfunction When one of the conditions below is met:
·

AM tuner PLL is unlocked

·

FM tuner PLL is unlocked

·

Tuner malfunction


Radio and display receiver assembly
B15B4 CD Changer Malfunction When one of the conditions below is met:
·

Mechanical communication error

·

Load/Eject malfunction

·

Read malfunction

·

Mechanical malfunction


Radio and display receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

Check that the wire harness is properly installed and does not have any sharp bends, pinching or loose connections.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Radio and Display Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Check for DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Radio and Display Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY