Display the "Display" screen.
Turn the light control switch to the tail or head position.
Check if "Day Mode" on the display adjustment screen is on.
"Day Mode" setting is off
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.
Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation.
| Light Control Switch | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the light control switch operation.
| Light Control Switch | Display |
|---|---|
| Tail or head | DIM |
| Off | BRIGHT |
| Proceed to |
|---|
| OK |
| NG |
OK
NG