Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) › from 2014.10
RM3090E _58 Vehicle Interior _008788 SEAT BELT _0066374 SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) J

SEAT BELT  SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)  Front Passenger Side Seat Belt Warning Light Malfunction  


DESCRIPTION

When the ignition switch is turned to ON, the occupant detection ECU sends a signal to the airbag sensor assembly to indicate the state of the front seat inner belt assembly RH and also whether the front passenger seat is occupied. The airbag sensor assembly sends those signals to the combination meter assembly via CAN communication. The combination meter assembly illuminates, blinks or turns off the front seat belt warning light on the combination meter assembly in accordance with these signals.

HINT:

The front seat belt warning light on the combination meter assembly is used for both the driver side seat and front passenger side seat.


WIRING DIAGRAM

C256690E05
0.302,1.823 2.135,2.198 1.833,0.375 10 false Front Occupant Classification Sensor LH 5.031,1.854 6.823,2.24 1.792,0.385 10 false Rear Occupant Classification Sensor LH 1.729,0.365 1.896,0.656 0.167,0.292 10 false 1 1.74,0.854 1.906,1.146 0.167,0.292 10 false 2 1.74,1.333 1.906,1.625 0.167,0.292 10 false 3 2.771,0.271 2.938,0.563 0.167,0.292 10 false 1 2.781,0.75 2.948,1.042 0.167,0.292 10 false 3 2.781,1.25 2.948,1.542 0.167,0.292 10 false 5 2.698,0.458 3,0.698 0.302,0.24 10 false d15 2.698,0.948 3,1.188 0.302,0.24 10 false d15 2.698,1.427 3,1.667 0.302,0.24 10 false d15 4.49,0.469 4.792,0.708 0.302,0.24 10 false d15 4.5,0.948 4.802,1.188 0.302,0.24 10 false d15 4.5,1.427 4.802,1.667 0.302,0.24 10 false d15 4.573,0.26 4.74,0.552 0.167,0.292 10 false 2 4.583,0.74 4.75,1.031 0.167,0.292 10 false 4 4.583,1.229 4.75,1.521 0.167,0.292 10 false 6 5.375,0.385 5.542,0.677 0.167,0.292 10 false 1 5.385,0.854 5.552,1.146 0.167,0.292 10 false 2 5.385,1.354 5.552,1.646 0.167,0.292 10 false 3 2.708,2.76 3.01,3 0.302,0.24 10 false d16 2.708,3.552 3.01,3.792 0.302,0.24 10 false d16 4.49,2.76 4.792,3 0.302,0.24 10 false d16 4.5,3.563 4.802,3.802 0.302,0.24 10 false d16 2.781,2.563 2.948,2.854 0.167,0.292 10 false 4 2.781,3.344 2.948,3.635 0.167,0.292 10 false 7 4.563,2.563 4.708,2.854 0.146,0.292 10 false 5 4.563,3.365 4.708,3.656 0.146,0.292 10 false 8 4.917,3.854 5.344,4.083 0.427,0.229 10 false d25 4.938,4.01 7.115,4.24 2.177,0.229 10 false Front Seat Inner Belt Assembly RH 5.021,1.677 5.385,1.906 0.365,0.229 10 false d24 0.302,1.667 0.729,1.896 0.427,0.229 10 false d26 2.896,4.146 5.073,4.375 2.177,0.229 10 false Occupant Detection ECU 2.896,4.688 3.063,4.979 0.167,0.292 10 false 9 2.833,5.26 3,5.552 0.167,0.292 10 false 17 3.094,4.781 3.667,5.01 0.573,0.229 10 false FSR+ 3.073,5.354 3.646,5.583 0.573,0.229 10 false FSR- 2.76,5.948 4.385,6.188 1.625,0.24 10 false Airbag Sensor Assembly 4.406,5.969 6.229,6.219 1.823,0.25 10 false Combination Meter Assembly 2.771,5.792 3.188,6.104 0.417,0.313 10 false M25 4.406,5.833 4.823,6.146 0.417,0.313 10 false G16 0.573,6.406 3.594,6.646 3.021,0.24 10 false : CAN Communication Line 5.385,2.656 5.677,2.885 0.292,0.229 10 false 2 5.396,3.458 5.688,3.688 0.292,0.229 10 false 1 5.583,2.635 6.167,2.844 0.583,0.208 10 false LBE- 5.594,3.698 6.177,3.906 0.583,0.208 10 false LBE+

CAUTION / NOTICE / HINT

NOTICE:

The seat belt warning system uses the CAN communication system. First, confirm that there is no malfunction in the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)>HOW TO PROCEED WITH TROUBLESHOOTING


PROCEDURE

1.CHECK DTC (OCCUPANT CLASSIFICATION SYSTEM)
a.

Clear the DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>OCCUPANT CLASSIFICATION SYSTEM>DTC CHECK / CLEAR

Body Electrical > Occupant Detection > Clear DTCs
50002 59

b.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>OCCUPANT CLASSIFICATION SYSTEM>DTC CHECK / CLEAR

Body Electrical > Occupant Detection > Trouble Codes
50001 59

Result:
Proceed to
DTCs are not output
DTCs are output



DTCs are not output

2.CHECK DTC (AIRBAG SYSTEM)

DTCs are output

2.CHECK DTC (AIRBAG SYSTEM)
a.

Clear the DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(w/ Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

b.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(w/ Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188

Result:
Proceed to
DTCs are not output
DTCs are output



DTCs are not output

3.READ VALUE USING GTS (PASSENGER BUCKLE SW)

DTCs are output

3.READ VALUE USING GTS (PASSENGER BUCKLE SW)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Occupant Detection / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Occupant Detection > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Passenger Buckle SW Front passenger side buckle switch Set, Unset or NG Set: Front seat belt RH fastened
Unset: Front seat belt RH not fastened
NG: Data is not determined
-
Body Electrical > Occupant Detection > Data List
Tester Display
Passenger Buckle SW
50003 59 21

Result:
Result Proceed to
Unset or Set is displayed on the GTS screen according to the front passenger side seat belt condition A
Unset or Set is not displayed normally on the GTS screen according to the front passenger side seat belt condition B
NG is displayed on the GTS screen C



A

4.READ VALUE USING GTS (RIGHT SIDE BUCKLE SW)

B

REPLACE FRONT SEAT INNER BELT ASSEMBLY RH

C

4.READ VALUE USING GTS (RIGHT SIDE BUCKLE SW)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / SRS Airbag / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > SRS Airbag > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Right side Buckle SW Front passenger side buckle switch Unset, Set or NG Unset: Front seat belt RH is not fastened
Set: Front seat belt RH is fastened
NG: Data is not determined
-
Body Electrical > SRS Airbag > Data List
Tester Display
Right side Buckle SW
50003 188 5

Result:
Result Proceed to
Unset or Set is displayed on the GTS screen according to the front passenger side seat belt condition A
·

Unset or Set is not displayed normally on the GTS screen according to the front passenger side seat belt condition

·

NG is displayed on the GTS screen


B



A

REPLACE COMBINATION METER ASSEMBLY

B