16100
1.INSTALL ENGINE WATER PUMP ASSEMBLY
| *a | Protrusion |
Align the protrusion of a new gasket with the cutout in the timing chain cover sub-assembly and install the gasket to the groove of the timing chain cover sub-assembly.
Be sure to clean the contact surfaces.
Install the engine water pump assembly with the 6 bolts.
| Item | Length |
|---|---|
| Bolt A | 35 mm (1.38 in.) |
| Bolt B | 25 mm (0.984 in.) |
16620
2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
27020
3.INSTALL GENERATOR ASSEMBLY
4.ADD ENGINE COOLANT
5.INSPECT FOR COOLANT LEAK
51441
6.INSTALL NO. 1 ENGINE UNDER COVER