Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › ENGINE OIL TEMPERATURE SENSOR › from 2015.04
RM3090E _51 Engine / Hybrid System _008381 3ZR-FAE ENGINE CONTROL _0166187 ENGINE OIL TEMPERATURE SENSOR A

3ZR-FAE ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 51443C 1.REMOVE REAR ENGINE UNDER COVER RH

Hide 89429F 2.REMOVE ENGINE OIL TEMPERATURE SENSOR

a.

Disconnect the engine oil temperature sensor connector.


b.
A346181C01
1.094,0.719 1.219,0.719 1.219,0.719 1.344,1.042 true 0.927,0.635 1.104,0.833 0.177,0.198 10 true *a
*a 19 mm Deep Socket Wrench


Using a 19 mm deep socket wrench, remove the engine oil temperature sensor from the timing chain cover sub-assembly.

NOTICE:

If an engine oil temperature sensor has been struck or dropped, replace it.



c.

Remove the gasket from the engine oil temperature sensor.