Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › from 2015.04
RM3090E _51 Engine / Hybrid System _008381 3ZR-FAE ENGINE CONTROL _0046862 CRANKSHAFT POSITION SENSOR A

3ZR-FAE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11401G 1.INSTALL CRANKSHAFT POSITION SENSOR

a.
A346178C01
1.76,0.865 2.146,0.448 2.146,0.448 2.344,0.448 false 2.385,0.354 2.698,0.51 0.313,0.156 10 false *1
*1 O-ring


Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.


b.

Install the crankshaft position sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

When reusing the crankshaft position sensor, inspect the O-ring.

·

Make sure that the O-ring is not cracked or jammed during installation.




c.

Connect the crankshaft position sensor connector.


Hide 51443 2.INSTALL REAR ENGINE UNDER COVER RH