Home › Engine / Hybrid System › STOP AND START › ENGINE STOP AND START ECU › 2015.04–2015.10
RM3090E _51 Engine / Hybrid System _009049 STOP AND START _0049620 ENGINE STOP AND START ECU A

STOP AND START  ENGINE STOP AND START ECU  INSTALLATION  


PROCEDURE

Hide 89261A 1.INSTALL ENGINE STOP AND START ECU (for RHD)

a.

Install the engine stop and start ECU with the bolt and nut.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the 3 connectors to the engine stop and start ECU.


Hide 89261A 2.INSTALL ENGINE STOP AND START ECU (for LHD)

A273346

a.

Engage the 2 claws and install the engine stop and start ECU to the ECU integration box RH.


Hide 82877 3.INSTALL ECU INTEGRATION BOX RH (for LHD)

a.

Install the ECU integration box RH with the 2 nuts and bolt.

Torque:
for Nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)
for Bolt : 12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Connect each connector and clamp.


Hide 55550 4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 55607 5.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION