88460
1.INSTALL COOLER CONDENSER ASSEMBLY
Attach the 2 guides to install the cooler condenser assembly as shown in the illustration.
Do not damage the cooler condenser or radiator when installing the cooler condenser assembly.
If a new cooler condenser assembly is installed, add compressor oil to the condenser as follows.
Add 40 cc (1.35 fl. oz.)
ND-OIL 8 or equivalent
16533
2.INSTALL UPPER RADIATOR SUPPORT
Install the 2 upper radiator supports with the 4 bolts.
16533B
3.INSTALL NO. 1 RADIATOR SUPPORT
Install the 2 No. 1 radiator supports with the 2 bolts.
88706
4.CONNECT LIQUID PIPE SUB-ASSEMBLY
Remove the vinyl tape from the liquid pipe sub-assembly and the connecting part of the cooler condenser with receiver assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.
ND-OIL 8 or equivalent
Install the O-ring to the liquid pipe sub-assembly.
Connect the liquid pipe sub-assembly to the cooler condenser assembly with the bolt.
88703
5.CONNECT DISCHARGE HOSE SUB-ASSEMBLY
Remove the vinyl tape from the discharge hose sub-assembly and the connecting part of the cooler condenser with receiver assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.
ND-OIL 8 or equivalent
Install the O-ring to the discharge hose sub-assembly.
Connect the discharge hose sub-assembly to the cooler condenser assembly with the bolt.
16681A
6.INSTALL RADIATOR UPPER AIR GUIDE PLATE
52029
7.INSTALL FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY
8.INSTALL HEADLIGHT
for Halogen Headlight: Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY(for Halogen Headlight)>INSTALLATION
for LED Headlight: Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY(for LED Headlight)>INSTALLATION
9.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
10.WARM UP ENGINE
11.INSPECT FOR REFRIGERANT LEAK