Home › Engine / Hybrid System › 2WW ENGINE CONTROL › MASS AIR FLOW METER › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208484 MASS AIR FLOW METER G

2WW ENGINE CONTROL  MASS AIR FLOW METER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22204 1.INSPECT MASS AIR FLOW METER SUB-ASSEMBLY

a.

Check the mass air flow value.

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Powertrain / Engine and ECT / Data List / MAF.

Powertrain > Engine and ECT > Data List
Tester Display
MAF
50003 371 2

v.
A316499C01
0,0 0,0 false
V100135

Air


Blow air into the mass air flow meter sub-assembly and check that the mass air flow meter value fluctuates.

If the result is not as specified, check the mass air flow meter sub-assembly, wire harness and ECM.

Click hereEngine / Hybrid System>2WW ENGINE CONTROL>ECD SYSTEM>P0102