Home › Engine / Hybrid System › 2WW ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208487 ENGINE COOLANT TEMPERATURE SENSOR A

2WW ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 12611 3.REMOVE NO. 1 ENGINE COVER

Hide 89422C 4.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A350238

Disconnect the engine coolant temperature sensor connector.


b.

Using a 17 mm (12P) deep socket wrench, remove the engine coolant temperature sensor.

NOTICE:

Avoid physical shock to the engine coolant temperature sensor.