Home › Engine / Hybrid System › 2WW ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208489 MANIFOLD ABSOLUTE PRESSURE SENSOR A

2WW ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89420G 1.INSTALL TURBO PRESSURE SENSOR ASSEMBLY

a.

Using a T27 "TORX" socket wrench, install the turbo pressure sensor assembly to the intake manifold with the bolt.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

NOTICE:

Avoid physical shock to the turbo pressure sensor assembly.



b.

Connect the turbo pressure sensor assembly connector.


Hide 2.INSTALL ENGINE OIL LEVEL DIPSTICK

a.

Install the engine oil level dipstick.