Home › Engine / Hybrid System › 2WW ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208489 MANIFOLD ABSOLUTE PRESSURE SENSOR A

2WW ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 12611 1.REMOVE NO. 1 ENGINE COVER

Hide 2.REMOVE ENGINE OIL LEVEL DIPSTICK

a.
A315749

Remove the engine oil level dipstick.


Hide 89420G 3.REMOVE TURBO PRESSURE SENSOR ASSEMBLY

a.
A315750

Disconnect the turbo pressure sensor assembly connector.


b.

Using a T27 "TORX" socket wrench, remove the bolt and turbo pressure sensor assembly from the intake manifold.

NOTICE:

Avoid physical shock to the turbo pressure sensor assembly.