Home › Engine / Hybrid System › 2WW ENGINE CONTROL › AIR FUEL RATIO SENSOR(for Sensor 2) › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208491 AIR FUEL RATIO SENSOR(for Sensor 2) A

2WW ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 2)  REMOVAL  


PROCEDURE

Hide 51442 1.REMOVE NO. 2 ENGINE UNDER COVER

Hide 89467C 2.REMOVE AIR FUEL RATIO SENSOR

a.
A350251

Disconnect the air fuel ratio sensor connector.


b.

Raise the air fuel ratio sensor connector to remove the air fuel ratio sensor connector from the bracket.


c.

Detach the 2 clamps.


d.
A340628N01
1.802,0.958 1.917,1.385 1.917,1.385 2.385,1.385 true 2.438,1.292 2.823,1.49 0.385,0.198 10 true SST

Using SST, remove the air fuel ratio sensor.

SST
09224-00011  

NOTICE:

Avoid physical shock to the air fuel ratio sensor connector.