Home › Engine / Hybrid System › 2WW EMISSION CONTROL › EGR VALVE › from 2015.10
RM3090E _51 Engine / Hybrid System _044375 2WW EMISSION CONTROL _0210861 EGR VALVE A

2WW EMISSION CONTROL  EGR VALVE  REMOVAL  


PROCEDURE

Hide 25680 1.REMOVE EGR COOLER ASSEMBLY WITH EGR VALVE ASSEMBLY

Hide 25620 2.REMOVE EGR VALVE ASSEMBLY

a.
A350705

Remove the grommet from the EGR cooler assembly.


b.

Using pliers, grasp the 4 EGR cooler hose clamps and move the 4 EGR cooler hose clamps as shown in the illustration to remove the 2 EGR cooler hoses from the EGR cooler assembly and EGR valve assembly.

A350714C01
0.885,0.885 1.042,0.885 1.042,0.885 1.729,1.188 true 4.573,1.135 4.719,1.135 4.719,1.135 5.042,1.25 true 5.875,0.698 5.802,0.698 5.802,0.698 5.635,1.208 false 2.948,1.667 2.854,1.667 2.854,1.667 2.396,1.302 true 2.073,1.156 2.302,0.26 2.302,0.26 2.552,0.26 false 6.438,2.208 6.438,1.615 true 0.688,0.802 1.177,1.125 0.49,0.323 10 false *a 2.594,0.198 3.792,0.375 1.198,0.177 10 false *1 3,1.583 3.854,1.948 0.854,0.365 10 false *a 6.354,2.219 7.156,2.604 0.802,0.385 10 false *a 5.958,0.615 6.292,0.927 0.333,0.313 10 false *1 4.365,1.042 4.677,1.365 0.313,0.323 10 false *a
*1 EGR Cooler Hose *a EGR Cooler Hose Clamp



c.
A350708

Using a T30H "TORX" socket wrench, remove the 2 bolts, EGR valve assembly and gasket.