Home › Engine / Hybrid System › 2WW EMISSION CONTROL › EGR BYPASS VALVE SWITCHING VALVE › from 2015.10
RM3090E _51 Engine / Hybrid System _044375 2WW EMISSION CONTROL _0210863 EGR BYPASS VALVE SWITCHING VALVE A

2WW EMISSION CONTROL  EGR BYPASS VALVE SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 25860D 1.INSTALL EGR BYPASS VALVE SWITCHING VALVE

a.

Attach the claw and install the EGR bypass valve switching valve assembly.


b.

Connect the 2 vacuum hoses.


c.

Connect the EGR bypass valve switching valve assembly connector.

i.

Push on the EGR bypass valve switching valve assembly connector until the spring lock makes a sound and returns to its original position.

HINT:

It is not necessary to push the spring lock down when connecting the EGR bypass valve switching valve assembly connector.