Home › Engine / Hybrid System › 2WW EMISSION CONTROL › EGR BYPASS VALVE SWITCHING VALVE › from 2015.10
RM3090E _51 Engine / Hybrid System _044375 2WW EMISSION CONTROL _0210863 EGR BYPASS VALVE SWITCHING VALVE A

2WW EMISSION CONTROL  EGR BYPASS VALVE SWITCHING VALVE  REMOVAL  


PROCEDURE

Hide 12611 1.REMOVE NO. 1 ENGINE COVER

Hide 25860D 2.REMOVE EGR BYPASS VALVE SWITCHING VALVE

a.

Disconnect the EGR bypass valve switching valve assembly connector.

i.
A341645C01
0.781,1.604 0.781,1.042 true 0.708,1.646 0.906,1.844 0.198,0.198 10 true *a
*a Spring Lock


Pull the EGR bypass valve switching valve assembly connector off of the EGR bypass valve switching valve assembly while pushing down the spring lock of the EGR bypass valve switching valve assembly connector.

NOTICE:

If the EGR bypass valve switching valve assembly connector is disconnected without the spring lock being pushed down, the EGR bypass valve switching valve assembly connector may be damaged.



ii.

Disconnect the 2 vacuum hoses.


iii.

Detach the claw and remove the EGR bypass valve switching valve assembly.