Home › Engine / Hybrid System › 2WW EMISSION CONTROL › DIFFERENTIAL PRESSURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044375 2WW EMISSION CONTROL _0210869 DIFFERENTIAL PRESSURE SENSOR A

2WW EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 12611 1.REMOVE NO. 1 ENGINE COVER

Hide 89481B 2.REMOVE DIFFERENTIAL PRESSURE SENSOR

a.
A341661C01
0.823,0.823 0.948,1.115 0.948,1.115 1.042,1.115 false 1.083,1.021 1.344,1.219 0.26,0.198 10 false *a 2.802,1.031 3.031,1.25 0.229,0.219 10 false *c 0.927,0.167 1.146,0.365 0.219,0.198 10 true *b
*a White-colored Lock
*b Slide
*c Push


Slide the white-colored lock of the differential pressure sensor connector as shown in the illustration to release it and disconnect the differential pressure sensor connector.


b.
A341662

Using a T20 "TORX" socket wrench, remove the screw and differential pressure sensor.


c.

Disconnect the 2 No. 1 vacuum transmitting hoses.


d.

Remove the 2 No. 1 vacuum transmitting hoses from the differential pressure sensor.