Home › Engine / Hybrid System › 2WW INTAKE / EXHAUST › EXHAUST PIPE › from 2015.10
RM3090E _51 Engine / Hybrid System _044376 2WW INTAKE / EXHAUST _0210934 EXHAUST PIPE A

2WW INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves and protective glasses when removing the exhaust pipe assembly.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 17430 1.REMOVE TAILPIPE ASSEMBLY

a.

Remove the 2 bolts and 2 compression springs.


b.

Disconnect the tailpipe assembly from the 2 exhaust pipe supports.


c.

Remove the gasket.


Hide 50819 2.REMOVE FRONT FLOOR COVER

Hide 51442 3.REMOVE NO. 2 ENGINE UNDER COVER

Hide 17410 4.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 compression springs.


b.

Disconnect the front exhaust pipe assembly from the 3 exhaust pipe supports.


c.

Remove the gasket.