Home › Drivetrain › EA64 MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSAXLE OIL › from 2015.10
RM3090E _52 Drivetrain _008755 EA64 MANUAL TRANSMISSION / TRANSAXLE _0050286 MANUAL TRANSAXLE OIL A

EA64 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE OIL  REPLACEMENT  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.DRAIN MANUAL TRANSAXLE OIL

C197632C01
1.771,0.542 1.188,0.146 1.188,0.146 0.875,0.146 true 1.99,2.063 1.667,1.615 1.667,1.615 1.396,1.615 true 0.635,0.073 0.854,0.281 0.219,0.208 10 *1 1.167,1.531 1.385,1.74 0.219,0.208 10 *2
*1 Manual Transmission Filler Plug
*2 Manual Transmission Drain Plug


a.

Remove the manual transmission filler plug and gasket.


b.

Remove the drain plug and gasket to drain the manual transmission oil.


c.

Install a new gasket and the manual transmission drain plug.

Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)


Hide 3.ADD MANUAL TRANSAXLE OIL

a.
C278961C01
2.667,0.854 2.979,1.052 0.313,0.198 10 false *a
*a 0 to 5 mm (0 to 0.197 in.)


Add oil until the oil level is within 0 to 5 mm (0 to 0.197 in.) from the bottom of the manual transmission filler plug opening.

Manual Transaxle Oil:

"TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"


Standard Capacity:

2.1 liters (2.2 US qts, 1.8 Imp. qts)



b.

Install a new gasket and the manual transmission filler plug.

Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)

NOTICE:
·

When adding transaxle oil, make sure the vehicle is level.

·

An excessively large or small amount of oil may cause problems.

·

After adding oil, drive the vehicle and recheck the oil level.




Hide 4.INSPECT FOR OIL LEAK

Hide 51441 5.INSTALL NO. 1 ENGINE UNDER COVER