Home › Drivetrain › K114 MULTIDRIVE / CVT › OIL PAN › from 2015.10
RM3090E _52 Drivetrain _044380 K114 MULTIDRIVE / CVT _0212484 OIL PAN A

K114 MULTIDRIVE / CVT  OIL PAN  INSTALLATION  


PROCEDURE

Hide 35394D 1.INSTALL OIL CLEANER (CVT) MAGNET

a.
C295678C02
1.448,0.885 2.26,0.885 false 1.76,1.51 1.76,0.885 false 1.271,0.823 1.583,1.021 0.313,0.198 10 true *1
*1 Oil Cleaner (CVT) Magnet


Install the 2 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly.


Hide 35106L 2.INSTALL TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY

a.

Clean the transaxle oil (CVT) pan sub-assembly installation surface of the continuously variable transaxle assembly.


b.

Install a new transaxle oil pan (CVT) gasket to the transaxle oil (CVT) pan sub-assembly.


c.

Install the transaxle oil (CVT) pan sub-assembly to the continuously variable transaxle assembly with the 19 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


d.

Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

Torque:
1.7 N*m (17 kgf*cm, 15 in.*lbf)


e.

Using a 6 mm hexagon socket wrench, temporarily install the gasket and overflow plug to the transaxle oil (CVT) pan sub-assembly.

HINT:

Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.



f.

Using a 10 mm hexagon socket wrench, install a new gasket and drain plug to the transaxle oil (CVT) pan sub-assembly.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 3.ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide 4.INSPECT FOR FLUID LEAK

Hide 51444 5.INSTALL REAR ENGINE UNDER COVER LH

Hide 51441 6.INSTALL NO. 1 ENGINE UNDER COVER