Home › Drivetrain › K114 MULTIDRIVE / CVT › SHIFT LEVER › from 2015.10
RM3090E _52 Drivetrain _044380 K114 MULTIDRIVE / CVT _0212490 SHIFT LEVER A

K114 MULTIDRIVE / CVT  SHIFT LEVER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

The procedure listed below is for LHD vehicles.


·

Use the same procedure for RHD and LHD vehicles.



PROCEDURE

Hide 33530F 1.INSTALL SHIFT LEVER ASSEMBLY

a.
C279460N02
0.854,1.813 1.01,2.01 0.156,0.198 10 1 2.521,0.708 2.677,0.906 0.156,0.198 10 2 0.875,0.688 1.031,0.885 0.156,0.198 10 3 2.521,1.813 2.677,2.01 0.156,0.198 10 4

Install the shift lever assembly with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Connect the 2 connectors and attach the 4 harness clamps to the shift lever assembly.

C279459C02
0.385,0.042 0.698,0.24 0.313,0.198 10 false *A 3.99,0.042 4.302,0.24 0.313,0.198 10 false *B
*A for LHD *B for RHD



Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 58901A 4.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY