Home › Drivetrain › K111F MULTIDRIVE / CVT › OIL COOLER › from 2015.10
RM3090E _52 Drivetrain _009408 K111F MULTIDRIVE / CVT _0051018 OIL COOLER A

K111F MULTIDRIVE / CVT  OIL COOLER  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 16267H 3.DISCONNECT WATER BY-PASS HOSE

C203373

a.

Slide the 2 clips and disconnect the 2 water by-pass hoses from the oil cooler.


Hide 32941 4.REMOVE NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE

C279765

a.

Slide the 4 clips and disconnect the 2 oil cooler hoses from the oil cooler and transaxle, and remove them.


Hide 33493B 5.REMOVE OIL COOLER

C203375

a.

Remove the 3 bolts and oil cooler from the continuously variable transaxle assembly.