Home › Engine / Hybrid System › 2WW LUBRICATION › ENGINE OIL COOLER › from 2015.10
RM3090E _51 Engine / Hybrid System _044378 2WW LUBRICATION _0220675 ENGINE OIL COOLER A

2WW LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL OIL CHECK VALVE SUB-ASSEMBLY

a.

Install the 2 oil check valve sub-assemblies and 2 new gaskets to the oil filter assembly.


Hide 15701C 2.INSTALL OIL COOLER COVER SUB-ASSEMBLY

a.

Using a T8 "TORX" socket wrench, install the oil cooler cover sub-assembly to the oil filter assembly with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 15600 3.INSTALL OIL FILTER ASSEMBLY

a.

Install a new gasket to the oil filter assembly.


b.

Install the oil filter assembly with the 6 bolts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 15601 4.INSTALL OIL FILTER SUB-ASSEMBLY