Home › Drivetrain › CLUTCH › CLUTCH UNIT(for 2WW) › from 2015.10
RM3090E _52 Drivetrain _008754 CLUTCH _0220760 CLUTCH UNIT(for 2WW) A

CLUTCH  CLUTCH UNIT(for 2WW)  REMOVAL  


PROCEDURE

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
C299395

Remove the clutch release fork sub-assembly with the clutch release bearing assembly from the manual transaxle assembly.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.
C299396

Remove the clutch release bearing assembly and release bearing hub clip from the clutch release fork.


Hide 31237 4.REMOVE CLUTCH RELEASE FORK SUPPORT BOOT

a.
C299405

Remove the clutch release fork support boot and snap ring from the clutch release fork.


Hide 31236B 5.REMOVE RELEASE FORK SUPPORT

a.
C304173

Remove the release fork support from the manual transaxle assembly.


Hide 31126 6.REMOVE CLUTCH RELEASE FORK BOOT

a.
C299398

Remove the clutch release fork boot from the manual transaxle assembly.


Hide 31210 7.REMOVE CLUTCH COVER ASSEMBLY

a.
C299399C01
1.073,1.354 0.719,0.927 0.719,0.927 1.167,1.354 true 2.156,0.073 2.417,0.281 0.26,0.208 10 true 1 1.219,1.99 1.396,2.167 0.177,0.177 10 false 2 0.885,0.313 1.094,0.5 0.208,0.188 10 true 3 2.417,1.667 2.594,1.844 0.177,0.177 10 false 4 0.719,1.604 0.865,1.813 0.146,0.208 10 true 5 2.646,0.833 2.823,1.01 0.177,0.177 10 false 6 0.479,0.76 0.667,0.938 0.188,0.177 10 true *a
*a Matchmark


Place matchmarks on the clutch cover assembly and flywheel sub-assembly.


b.

Loosen each set bolt 180° at a time until the spring tension is released.

NOTICE:

Be sure to uniformly loosen the bolts 180° at a time according to the order in the illustration.



c.

Remove the set bolts and pull off the clutch cover assembly to remove it.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250 8.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc assembly, the pressure plate, and the surface of the flywheel sub-assembly away from oil and foreign matter.