Home › Engine / Hybrid System › 2WW FUEL › FUEL TEMPERATURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044374 2WW FUEL _0221823 FUEL TEMPERATURE SENSOR A

2WW FUEL  FUEL TEMPERATURE SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

When working on the fuel circuit, protect the generator assembly against contamination. Cover the generator assembly with suitable materials. Failure to comply with this procedure may result in a generator assembly malfunction.


PROCEDURE

Hide 12611 1.REMOVE NO. 1 ENGINE COVER

Hide 89454 2.REMOVE FUEL TEMPERATURE SENSOR

a.
A316340

Disconnect the fuel temperature sensor connector.


b.

Using a 17 mm (12P) deep socket wrench, remove the fuel temperature sensor from the fuel feed line.


c.

Remove the O-ring from the fuel temperature sensor.