Home › Engine / Hybrid System › 2WW FUEL › FUEL PRESSURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044374 2WW FUEL _0221824 FUEL PRESSURE SENSOR A

2WW FUEL  FUEL PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89458A 1.INSTALL FUEL PRESSURE SENSOR

a.

Check the threads and sealing surfaces for damage prior to installing the fuel pressure sensor.


b.

Make sure the fuel pressure sensor, sealing surfaces and threads are free from dirt and any foreign matter before performing work. Lightly grease the threads on the fuel pressure sensor.


c.

Screw in the fuel pressure sensor by hand. Then tighten the fuel pressure sensor.

Torque:
70 N*m (714 kgf*cm, 52 ft.*lbf)


Hide 23810A 2.INSTALL COMMON RAIL ASSEMBLY