Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM(for RHD with Central Gateway ECU) › from 2015.10
RM3090E _57 Power Source / Network _008434 NETWORKING _0221948 CAN COMMUNICATION SYSTEM(for RHD with Central Gateway ECU) C

NETWORKING  CAN COMMUNICATION SYSTEM(for RHD with Central Gateway ECU)  B1003  ECU Malfunction  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B1003 ECU Malfunction The central gateway ECU detects an internal malfunction. Central gateway ECU Central gateway ECU

PROCEDURE

1.CHECK DTC
a.

Clear the DTCs.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM(for RHD with Central Gateway ECU)>DTC CHECK / CLEAR

Body Electrical > Central Gateway > Clear DTCs
50002 382

b.

Recheck for DTCs and check that no DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM(for RHD with Central Gateway ECU)>DTC CHECK / CLEAR

Body Electrical > Central Gateway > Trouble Codes
50001 382
OK:

B1003 is not output.



Result:
Proceed to
OK
NG



OK

NG