Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.
87510Q
1.INSTALL REAR SEAT CUSHION HEATER ASSEMBLY LH
Using a tacker, install the rear seat cushion heater assembly LH with 12 new tack pins as shown in the illustration.
Secure the rear seat cushion heater assembly LH so that it does not bend or stretch.
Set the rear seat cushion heater assembly LH so that the nichrome wire is on the separate type rear seat cushion cover side.
71076S
2.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER
3.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
71694
4.INSTALL REAR SEAT LOWER CUSHION HINGE COVER LH
71693A
5.INSTALL REAR SEAT NO. 3 CUSHION HINGE COVER
72526A
6.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
71846B
7.INSTALL REAR SEATBACK NO. 1 BOARD CAP
8.INSTALL REAR SEAT ASSEMBLY LH