Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › INTRUSION SENSOR › from 2015.10
RM3090E _58 Vehicle Interior _008690 THEFT DETERRENT / KEYLESS ENTRY _0050372 INTRUSION SENSOR A

THEFT DETERRENT / KEYLESS ENTRY  INTRUSION SENSOR  INSTALLATION  


PROCEDURE

Hide 89732 1.INSTALL THEFT WARNING RADAR SENSOR

a.

w/ Sliding Roof:

i.

Install the theft warning radar sensor with the 2 screws.


ii.

Connect the connector.



b.

w/o Sliding Roof:

i.

Install the theft warning radar sensor with the 2 screws.


ii.

Connect the connector.



Hide 81208 2.INSTALL MAP LIGHT SUB-ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION