Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › RADIATOR GRILLE › from 2015.10
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0227100 RADIATOR GRILLE A

EXTERIOR PANELS / TRIM  RADIATOR GRILLE  REASSEMBLY  


PROCEDURE

Hide 75301A 1.INSTALL FRONT BUMPER EMBLEM SUB-ASSEMBLY

a.

Attach the 2 claws to install the radiator grille emblem sub-assembly.


b.

Install 2 new spring nuts.


Hide 53126A 2.INSTALL CENTER RADIATOR GRILLE MOULDING LH

a.

Attach the 2 claws and 3 guides to install the radiator grille moulding LH.


Hide 53125A 3.INSTALL CENTER RADIATOR GRILLE MOULDING RH

HINT:

Use the same procedure described for the LH side.


Hide 53395E 4.INSTALL HOOD TO FRONT END PANEL SEAL

a.

Attach the 10 clips to install the hood to front end panel seal.


Hide 88211B 5.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-crash Safety System)