Home › Engine / Hybrid System › CRUISE CONTROL › DRIVING SUPPORT ECU(for LHD) › from 2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0227216 DRIVING SUPPORT ECU(for LHD) A

CRUISE CONTROL  DRIVING SUPPORT ECU(for LHD)  REMOVAL  


PROCEDURE

Hide 55607 1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55550 2.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 88150A 3.REMOVE DRIVING SUPPORT ECU ASSEMBLY

a.

Disconnect the connector.


b.
B421016

Remove the nut.


c.

Detach the claw and remove the driving support computer assembly.