Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR(for Rear) › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0050794 ULTRASONIC SENSOR(for Rear) A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR(for Rear)  REMOVAL  


PROCEDURE

Hide 52159 1.REMOVE REAR BUMPER COVER

Hide 89348D 2.REMOVE ULTRASONIC SENSOR CLIP

HINT:
·

The illustration shows the ultrasonic sensor clip for the RH. The horizontal orientation of the ultrasonic sensor clip for the LH is opposite that of the image shown in the illustration.

·

Use the same procedure for both ultrasonic sensor clips.



a.
B428476

Detach the 2 claws and remove the ultrasonic sensor clip as shown in the illustration.


b.

Detach the clamp.


Hide 89341B 3.REMOVE NO. 2 ULTRASONIC SENSOR

a.

Disconnect the 4 connectors.

B421021


b.

Detach the 4 claws and remove the No. 2 ultrasonic sensor as shown in the illustration.

B354819

HINT:
·

The illustration shows the No. 2 ultrasonic sensor for the LH corner and back sensor RH. The horizontal orientation of the No. 2 ultrasonic sensor for the RH corner and back sensor LH is opposite that of the image shown in the illustration.

·

Use the same procedure for all No. 2 ultrasonic sensors.